For example, serial number T1H0311123456 separates as T1H | 03 | 11 | 123456. The date code 0311 means November 2003. T1H identifies the product or factory series, while 123456 is the unit sequence. Neither field influences the manufacture date. Appliage applies this rule to dates from 1989 onward. A year code from 79 through 88 still shows 1979 to 1988, marked unlikely. The Intertherm serial number alone is enough to return the manufacture month and an estimated age.

Intertherm Age Rules
The first three characters identify the product or factory series. The next four digits provide the manufacture date, and every character after position 7 belongs to the unit sequence.
- 1–3 product prefix
- 4–5 two digit year
- 6–7 numeric month
- 8 onward unit sequence
Nortek’s serial date guide defines the prefix, year, and month positions.
Year codes in positions 4–5
| Code range | Manufacture year | Example |
|---|---|---|
| 89–99 | 1989–1999 | 98 means 1998 |
| 00–26 | 2000–2026 | 03 means 2003 |
| 79–88 | 1979–1988, marked unlikely | Shown, but before 1989, the earliest year in Nortek’s dated examples |
| 27–78 | No current result | The 1900s year is too early, and the 2000s year is still in the future |
Month codes in positions 6–7
| Code | Month |
|---|---|
| 01 | January |
| 02 | February |
| 03 | March |
| 04 | April |
| 05 | May |
| 06 | June |
| 07 | July |
| 08 | August |
| 09 | September |
| 10 | October |
| 11 | November |
| 12 | December |
| 00 or 13–99 | Invalid month code |
The month pair represents a calendar month, not a production week. For example, 11 means November. The model number is useful for identifying the equipment during service, but it is not part of this age calculation.
Intertherm Serial Numbers Appliage Cannot Find the Age
Intertherm equipment made before 1989 may use other numbering systems from the Lear Siegler era. If an older serial happens to fit this layout, a year from 1979 through 1988 is shown as unlikely, and anything earlier gets no date.
A value such as 15 or 99 in the month positions is invalid because the month must be between 01 and 12. Recheck the rating plate photo. If the characters were copied correctly, the equipment uses another date coding method.
The manufacture month isn’t the installation month. A furnace can wait at a distributor for months before it goes into a home, and a service sticker records a later visit rather than the factory date.
Intertherm’s Manufactured Home Connection
Intertherm heating and cooling equipment turns up in a lot of manufactured homes. The furnace, the indoor coil, and the outdoor unit each carry their own plate. If a condenser was swapped in at some point, its serial will make the whole system look newer than the furnace really is, so check all of them.
Nordyne equipment uses the same character positions. The Nordyne serial number lookup explains that family name and the invalid month case in more detail. Miller HVAC equipment also belongs to the Nordyne family. Intertherm water heaters do not use this HVAC rule, so Appliage does not return a date for them here.
Keep the plate photo with the equipment records. It preserves the serial, model, and equipment type for later service or documentation.
Sources
- Nortek Intertherm product literature. Nortek explains which digits give the year and month.
- Nortek Intertherm product literature (archived)
- Nortek HVAC support
For other brands, see our appliance serial number lookup.
